- gallery
- installations
- specifications
- composition and manufacture
- NBS Binns N10/170/SV - benches
- NBS Binns N10/210/SV/IV - hooks, hangers & shelves
- VZ1
double sided island bench with hooks and backrest - VZ2
with shoetray - standard seat height 435mm
depth 660mm
- VZ1A
single sided island bench with hooks and backrest - VZ2A
with shoetray - standard seat height 435mm
depth 360mm
- VZ3
double width island bench with 7 slats - VZ4
with shoetray - standard seat height 435mm
depth 660mm
- VZ5
single width island bench seat with 5 slats - VZ6
with shoetray - standard seat height 435mm
depth 465mm
- VZ7
wall bench with 3 slats for non-solid walls - VZ8
with shoetray - standard seat height 435mm
depth 330mm
- VZ7-4
wall bench with 4 slats for non-solid walls - VZ8-4
with shoetray - standard seat height 435mm
depth 450 mm
Sport England compliant
- VZ7-5
wall bench with 5 slats for non-solid walls - VZ8-5
with shoetray - standard seat height 435mm
depth 530mm
DDA compliant
- VZ7A
cantilever wall bench with 3 slats for solid walls - VZ7B
with shoetray - standard seat height 435mm
depth 330mm
- VZ7A-4
cantilever wall bench with 4 slats for solid walls - VZ7B-4
with shoetray - standard seat height 435mm
depth 450mm
Sport England compliant
- VZ9
wall bench for hollow or partitioned walls - VZ10
with shoetray - standard seat height 435mm
depth 330mm
- VZ11
single row hangers and shelf for solid walls - standard height 1785mm
depth 475mm
- VZ12
single row hangers and shelf with additional floor fixing for non-solid walls - VZ12ST
with shoetray - standard height 1785mm
depth 555mm
- VZ13
single width island with hangers and shelf. - VZ13ST
with shoetray - standard height 1785mm
depth 435mm
- VZ14
double width island with two rows of hangers and a shelf - VZ14ST
with shoetray - standard height 1785mm
depth 1100mm
- MSD
double sided mobile storage unit with mesh basket - standard height 1200mm
depth 450mm
- MSS
single sided mobile storage unit with mesh basket - standard height 1200mm
depth 450mm
The end frameworks are fully welded. Horizontal rails and shoetrays are bolted into the units during assembly on site. Stainless steel fixings are provided.
Seats and shelves are produced from sustainable European white beech slats 32 x 75mm and finished with a clear acid-catalysed lacquer. Aluminium seating slats are available for the toughest of environments or where a high level of humidity is present. Shoetrays are made from heavy duty angle frame and 3mm wire mesh. The finish of the range is powder coated in colour combinations from the RAL range. Timber slats are trimmed on site to the exact length to fit the desired space. There is an extensive range of accessories to complement the VZ range. These include a security locking system and hanger numbering options. On installation seat and shelf corner slats are mitred on site and steel plates are supplied to support the mitred joints. If shoetrays are required they stop at the seat supports nearest the corners.
Units can be manufactured to standard sizes or any height and length for no additional cost.